Measure lead TP-C812B

The Measure lead TP-C812B is a low noise differential measure lead designed to be used with the:

This 2 meter long measure lead splits in two individual ends of each 1.2 meter long. The BNC connector at one end plugs directly on the oscilloscope. The two other ends each feature a single 4 mm banana plug, on which application specific test points, clamps or probes can be plugged.

The Measure lead TP-C812B is very flexible, uses a heat resistant silicone isolation and shrouded banana plugs.

Order code: TP-C812B
EAN: 7423620446493
Price: 29.50

Category: Measure leads

The inputs of the Automotive Test Scope ATS610004DW-XMSG, Automotive Test Scope ATS605004DW-XMS, Automotive Test Scope ATS5004DW, Automotive Test Scope ATS610004D-XMSG, Automotive Test Scope ATS605004D-XMS and Automotive Test Scope ATS5004D are differential, which means that both sides of the inputs have a high impedance. There is no connection to ground as in conventional oscilloscopes which are used with coax cables. Using a coax cable on these oscilloscopes would result in the oscilloscopes picking up a lot of external interference.

High CMRR

The specially designed Measure lead TP-C812B has a high Common Mode Rejection Ratio (CMRR), it is very insensitive to external interfering signals. The two ends can be placed up to more than two meters apart, while picking up very little interference. With a conventional oscilloscope with a standard oscilloscope probe this is not possible. The maximum distance between the positive side and ground is then usually limited to approximately 20 cm. And this 20 cm is very susceptible to interference. The Measure lead TP-C812B for the Automotive Test Scope ATS610004DW-XMSG, Automotive Test Scope ATS605004DW-XMS, Automotive Test Scope ATS5004DW, Automotive Test Scope ATS610004D-XMSG, Automotive Test Scope ATS605004D-XMS and Automotive Test Scope ATS5004D does not have this disadvantage. External interference is very well suppressed by the special construction of the Measure lead TP-C812B. Measuring between two distant points is now possible.

The table below shows detailed specifications of the Measure lead TP-C812B.

Measure lead TP-C812B
Connectors
Oscilloscope side	isolated BNC plug
Test point side	red and black 4 mm shrouded banana plugs
Bandwidth	7 MHz
Safety	1000 V, double isolated
Dimensions
Total length	2000 mm
Length to split	800 mm
Length individual ends	1200 mm
Weight	80 g
Color	black
Certifications and compliances
CE conformity	yes
RoHS	yes
Accessories
Color coding rings	5 x 3 rings, various colors