Milliohm Meter TP-MM3000

The Milliohm Meter TP-MM3000 is an instrument that allows your Automotive Test Scope to measure small resistances with high accuracy.

The Milliohm Meter TP-MM3000 is particularly useful for checking and measuring the impedance of stator coils of electric motors.

Order code: TP-MM3000
EAN: 7423620436418
Price: 505.50

The Milliohm Meter TP-MM3000 determines the resistance by running a current through the component and measure the voltage across the component.

Special Kelvin clips are used to perform a 4-wire sensing measurement. This is an electrical impedance measuring technique that uses separate pairs of current-carrying and voltage-sensing electrodes. That allows to make more accurate measurements than the simpler and more usual 2-wire sensing. Separation of current and voltage electrodes eliminates the lead and contact resistance from the measurement. This is an advantage for precise measurement of low resistance values.

The Milliohm Meter TP-MM3000 is particularly useful for checking and measuring the impedance of stator coils of electric motors.

The table below shows detailed specifications of the Milliohm Meter TP-MM3000.

Electrical
Input range	0 Ω - 2.5 Ω
Accuracy	± 1 %
Output ratio	1 mΩ = 1 mV
Output voltage	Depending on resistance measured, 0 V to 2.65 V max
Connections
Input	Kelvin clips on 85 cm leads
Output	4 mm banana sockets

Dimensions
Length	145 mm (7.5 inch) excluding leads
Width	85 mm (2.8 inch)
Height	25 mm (1.0 inch)
Weight	235 g including battery

Power Requirements
Power indicator	Green LED
Battery type	Standard 9 V IEC 6F22 cell
Battery life	80 hours typical with alkaline
Low battery indication	Blinking power indicator LED

Ambient
Operating Temperature	20 °C to 25 °C (10 °C to 40 °C without specifications)
Relative Humidity	25 to 70%
Storage Temperature	-20 to 70 °C
Relative Humidity	25 to 80%

Certifications and Compliances
CE mark compliance	Yes
RoHS	Yes