• TiePie Automotive
  • /
  • News
  • /
  • Keeping distance with the wireless connected scope in the new Automotive Diagnostics Kits.

Keeping distance with the wireless connected scope in the new Automotive Diagnostics Kits.

May 4, 2020

TiePie engineering has introduced three new Automotive Diagnostics Kits, with the recently introduced automotive WiFiScopes. These WiFi / LAN connected scopes require no physical connection to your computer, allowing safe measurements at a distance.

TiePie Automotive Diagnostics Kit with WiFiScope

Heart of these Automotive Diagnostics Kits are the new and powerful high resolution Automotive Test Scopes with WiFi, LAN and USB connection. Besides one of these scopes, each kit contains a large set of essential accessories to give the automotive specialist all necessary tools to perform most of the diagnostic tests to locate the problem in a car. All is conveniently packed in a protective case.

Three new Automotive Diagnostics Kits are available:

The main component of the Automotive Diagnostics Kit ADK610004DW is the Automotive Test Scope ATS610004DW-XMSG. The differential Automotive Test Scope ATS610004DW-XMSG can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the Automotive Test Scope ATS610004DW-XMSG the possibility to perform fully wireless differential measurements for several hours. The high sampling rate of 1 GSa/s and large memory of 256 Mpts of the Automotive Test Scope ATS610004DW-XMSG are very useful for capturing and analyzing the fastest signals such as CAN bus communications and other high speed serial communications.

The Automotive Diagnostics Kit ADK605004DW is built around the Automotive Test Scope ATS605004DW-XMS. The WiFi, WAN, LAN and USB connected differential Automotive Test Scope ATS605004DW-XMS with built-in battery will perform fully wireless differential measurements for several hours. The high sampling rate of 500 MSa/s and large memory of 256 Mpts of the Automotive Test Scope ATS605004DW-XMS are very useful for capturing and analyzing fast signals such as CAN bus communications.

The main component of the Automotive Diagnostics Kit ADK5004DW is the WiFi, LAN and USB connected Automotive Test Scope ATS5004DW. The built-in battery and the low power consumption of the Automotive Test Scope ATS5004DW provide for many hours of fully wireless differential measurements. With the sampling rate of 50 MSa/s and memory of 128 kpts per channel, the Automotive Test Scope ATS5004DW can be used to measure almost any automotive signal.

Besides one of the differential automotive WiFiScopes, the Automotive Diagnostics Kits contain the following parts:

Amount Item
4 Measure lead TP-C1812B: low noise differential BNC to banana measuring lead, 3 m Measure lead TP-C1812B
1 Back Probe TP-BP85: thin and flexible back probe Back Probe TP-BP85 - Set of 8: Green, Blue, Yellow, Red, 4 Black
2 Ignition Pickup TP-IP250 Ignition Pickup TP-IP250
1 Current clamp TP-CC80: 0 - 20 A and 0 - 80 A input ranges Current clamp TP-CC80
1 Current clamp TP-CC600: 0 - 200 A and 0 - 600 A input ranges Current clamp TP-CC600
1 Accelerometer TP-ACC20 Accelerometer TP-ACC20
4 Differential attenuator TP-DA10 Differential attenuator TP-DA10
1 Alligator Clip TP-AC50B Alligator Clip TP-AC50B
1 ATIS Lite ATIS Lite
1 Handyscope / WiFiScope power supply: Handyscope / WiFiScope power supply Handyscope / WiFiScope power supply
1 Ground compensation Cable TP-GCC150: Ground compensation Cable Ground compensation Cable TP-GCC150
1 Carry case BB454 Carry case BB454
Complete set

Visit the Automotive Diagnostics Kits pages for much more information.