Oscilloscope Probe 1:1-1:10 - HP-3250I
The Oscilloscope Probe 1:1-1:10 - HP-3250I is a 1:1-1:10 selectable passive high impedance oscilloscope probe with 250 MHz bandwidth (1:10) designed and calibrated for use on oscilloscopes having an input impedance of 1 MOhm shunted by 20 pF. However, it may be compensated for use with an oscilloscope having an input capacitance of 10 to 30 pF.
The oscilloscope probe incorporates a two position slide switch in the head which selects the attenuation of X1 or X10.
The modular construction facilitates simple field replacement of the major parts.
Order code: HP-3250I
EAN: 7423639332367
Price: 34.80
Category: Probes
The table below shows detailed specifications of the Oscilloscope Probe 1:1-1:10 - HP-3250I.
Oscilloscope Probe 1:1-1:10 - HP-3250I - Specification | ||
|---|---|---|
| 1:1 | 1:10 | |
| Max. input voltage | 300 V CAT I / 150 V CAT II (DC + peak AC), derating with frequency | 600 V CAT I / 300 V CAT II (DC + peak AC), derating with frequency |
| Input resistance | 0 Ohm plus 1 MOhm oscilloscope input resistance | 9 MOhm ± 1% plus 1 MOhm oscilloscope input impedance |
| Input capacitance | 56 pF plus oscilloscope input capacitance | Approx. 13 pF |
| Bandwidth | DC to 6 MHz | DC to 250 MHz |
| Rise time | 58 ns | 1.4 ns |
| Compensating range | - | 10 to 30 pF |
| Cable length | 1.2 m (47 inch) | |
| Operating temperature | -10 °C to 55 °C | |
| Relative humidity | ≤ 85 % (at 35 °C) | |
| Safety | meets EN61010-031 CAT II | |
| Accessories | Channel identifier clip Sprung hook Ground lead Insulating tip IC tip Adjusting tool Measuring tip Sprung earth tip BNC adapter (male) | |
The Oscilloscope Probe 1:1-1:10 - HP-3250I is delivered with:
| Amount | Item |
|---|---|
| 1 | Oscilloscope Probe 1:1-1:10 - HP-3250I |
| 1 | Sprung hook |
| 1 | Ground lead |
| 1 | Insulating tip |
| 1 | IC tip |
| 1 | Measuring tip |
| 1 | BNC adapter (male) |
| 1 | Sprung earth tip |
| Various | Color coding rings |
